Mode

SCPI Commands :

SCENario:CEMit:EMITter:MODE:BEAM
SCENario:CEMit:EMITter:MODE:TRACkrec
SCENario:CEMit:EMITter:MODE

class ModeCls

Mode commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_beam() → float

# SCPI: SCENario:CEMit:EMITter:MODE:BEAM
value: float = driver.scenario.cemit.emitter.mode.get_beam()

Sets the used beam of the current mode.

return:

beam: float Range: 1 to 32

get_track_rec() → bool

# SCPI: SCENario:CEMit:EMITter:MODE:TRACkrec
value: bool = driver.scenario.cemit.emitter.mode.get_track_rec()

If enabled, the scan follows the receiver automatically.

return:

track_rec: ON| OFF| 1| 0

get_value() → float

# SCPI: SCENario:CEMit:EMITter:MODE
value: float = driver.scenario.cemit.emitter.mode.get_value()

Set the emitter mode.

return:

mode: float Range: 1 to 32

set_beam(beam: float) → None

# SCPI: SCENario:CEMit:EMITter:MODE:BEAM
driver.scenario.cemit.emitter.mode.set_beam(beam = 1.0)

Sets the used beam of the current mode.

param beam:

float Range: 1 to 32

set_track_rec(track_rec: bool) → None

# SCPI: SCENario:CEMit:EMITter:MODE:TRACkrec
driver.scenario.cemit.emitter.mode.set_track_rec(track_rec = False)

If enabled, the scan follows the receiver automatically.

param track_rec:

ON| OFF| 1| 0

set_value(mode: float) → None

# SCPI: SCENario:CEMit:EMITter:MODE
driver.scenario.cemit.emitter.mode.set_value(mode = 1.0)

Set the emitter mode.

param mode:

float Range: 1 to 32