Pedestal
SCPI Commands :
ANTenna:MODel:CARRay:PEDestal:X
ANTenna:MODel:CARRay:PEDestal:Z
ANTenna:MODel:CARRay:PEDestal
- class PedestalCls[source]
Pedestal commands group definition. 3 total commands, 0 Subgroups, 3 group commands
- get_value() float [source]
# SCPI: ANTenna:MODel:CARRay:PEDestal value: float = driver.antenna.model.carray.pedestal.get_value()
Sets the pedestal level of the antenna array.
- return:
pedestal: float Range: 0 to 1
- get_x() float [source]
# SCPI: ANTenna:MODel:CARRay:PEDestal:X value: float = driver.antenna.model.carray.pedestal.get_x()
Requires ANTenna:MODel:ARRay:DISTribution:TYPE 1. Sets the individual pedestal level of the antenna array in X or Z direction.
- return:
x: float Range: 0 to 1
- get_z() float [source]
# SCPI: ANTenna:MODel:CARRay:PEDestal:Z value: float = driver.antenna.model.carray.pedestal.get_z()
Requires ANTenna:MODel:ARRay:DISTribution:TYPE 1. Sets the individual pedestal level of the antenna array in X or Z direction.
- return:
z: No help available
- set_value(pedestal: float) None [source]
# SCPI: ANTenna:MODel:CARRay:PEDestal driver.antenna.model.carray.pedestal.set_value(pedestal = 1.0)
Sets the pedestal level of the antenna array.
- param pedestal:
float Range: 0 to 1
- set_x(x: float) None [source]
# SCPI: ANTenna:MODel:CARRay:PEDestal:X driver.antenna.model.carray.pedestal.set_x(x = 1.0)
Requires ANTenna:MODel:ARRay:DISTribution:TYPE 1. Sets the individual pedestal level of the antenna array in X or Z direction.
- param x:
float Range: 0 to 1
- set_z(z: float) None [source]
# SCPI: ANTenna:MODel:CARRay:PEDestal:Z driver.antenna.model.carray.pedestal.set_z(z = 1.0)
Requires ANTenna:MODel:ARRay:DISTribution:TYPE 1. Sets the individual pedestal level of the antenna array in X or Z direction.
- param z:
float Range: 0 to 1