Pedestal

SCPI Commands :

ANTenna:MODel:ARRay:PEDestal:X
ANTenna:MODel:ARRay:PEDestal:Z
ANTenna:MODel:ARRay:PEDestal

class PedestalCls

Pedestal commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_value() → float

# SCPI: ANTenna:MODel:ARRay:PEDestal
value: float = driver.antenna.model.array.pedestal.get_value()

Sets the pedestal level of the antenna array.

return:

pedestal: float Range: 0 to 1

get_x() → float

# SCPI: ANTenna:MODel:ARRay:PEDestal:X
value: float = driver.antenna.model.array.pedestal.get_x()

Requires ANTenna:MODel:ARRay:DISTribution:TYPE 1. Sets the individual pedestal level of the antenna array in X or Z direction.

return:

x: float Range: 0 to 1

get_z() → float

# SCPI: ANTenna:MODel:ARRay:PEDestal:Z
value: float = driver.antenna.model.array.pedestal.get_z()

Requires ANTenna:MODel:ARRay:DISTribution:TYPE 1. Sets the individual pedestal level of the antenna array in X or Z direction.

return:

z: No help available

set_value(pedestal: float) → None

# SCPI: ANTenna:MODel:ARRay:PEDestal
driver.antenna.model.array.pedestal.set_value(pedestal = 1.0)

Sets the pedestal level of the antenna array.

param pedestal:

float Range: 0 to 1

set_x(x: float) → None

# SCPI: ANTenna:MODel:ARRay:PEDestal:X
driver.antenna.model.array.pedestal.set_x(x = 1.0)

Requires ANTenna:MODel:ARRay:DISTribution:TYPE 1. Sets the individual pedestal level of the antenna array in X or Z direction.

param x:

float Range: 0 to 1

set_z(z: float) → None

# SCPI: ANTenna:MODel:ARRay:PEDestal:Z
driver.antenna.model.array.pedestal.set_z(z = 1.0)

Requires ANTenna:MODel:ARRay:DISTribution:TYPE 1. Sets the individual pedestal level of the antenna array in X or Z direction.

param z:

float Range: 0 to 1